Rear 8 mm left brake pipe

This rear left brake pipe 08 carries pressurised brake fluid to the braking system of the rear left wheel. When the brake pedal is pressed. hydraulic pressure flows through the pipe to the wheel cylinder, allowing the brake to operate.

This pipe is positioned at the rear axle of the vehicle. It connects the T-piece located in the central section of the rear axle to the wheel cylinder on the left-hand side. Its length of 2,800 mm allows it to follow the designated routing to the rear left braking system.

During installation, it must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage it. The tightness and sealing of the unions must also be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Length : 2,800 mm
. Compatible fluids : Lockheed, DOT 4 or LHM
. Position : rear left

Vehicles :
. 2CV
. Dyane
. Méhari