Front 8 mm brake pipe kit for disc brakes (2 pieces)

This set of 2 front disc brake pipes 08 carries pressurised LHM fluid through the front hydraulic braking circuit. It is designed for vehicles equipped with front disc brakes. When the brake pedal is pressed, hydraulic pressure flows through the pipes to the callipers, allowing the brakes to operate.

These two pipes are positioned within the vehicle's front braking system and provide the necessary hydraulic connections between the various components of the disc braking circuit.

During installation, the pipes must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage them. The unions are fitted and removed using an 8 mm spanner. The tightness and sealing of each union must be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Number of pipes : 2
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Compatible fluid : LHM
. Brake type : front disc brakes
. Tool for unions : 8 mm spanner
. Méhari compatibility : models first registered after 1978
. 2CV compatibility : models first registered after 1981

Vehicles :
. 2CV
. Méhari
. Dyane