Front 8 mm brake pipe kit for drum brakes (3 pieces)

This set of 3 front drum brake pipes 08 carries pressurised brake fluid through the front hydraulic braking circuit. It is designed for vehicles equipped with front drum brakes. When the brake pedal is pressed, hydraulic pressure flows through the pipes to the wheel cylinders, allowing the brakes to operate.

These three pipes are positioned within the vehicle's front braking system. They provide the various hydraulic connections required between the components of the front drum braking circuit and the wheel cylinders.

During installation, the pipes must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage them. The unions are fitted and removed using an 8 mm spanner. The tightness and sealing of each union must be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Number of pipes : 3
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Compatible fluids : Lockheed or DOT 4
. Brake type : front drum brakes
. Tool for unions : 8 mm spanner
. Méhari compatibility : models first registered between 1973 and 1978
. 2CV compatibility : models first registered between 1973 and 1981

Vehicles :
. 2CV
. Méhari
. Dyane