08 mm LHM brake pipe kit - stainless steel

This 08 mm LHM stainless steel brake pipe set carries pressurised brake fluid through the various components of the hydraulic circuit. It is designed for vehicles equipped with front disc brakes using LHM fluid. When the brake pedal is pressed, the pressure generated in the circuit is transmitted through the pipes to the braking components, allowing the brakes to operate.

The various pipes are positioned on the vehicle following the routing of the braking circuit. They connect the various hydraulic components together and must be installed in their respective positions, following the designated routing on the vehicle.

During installation, each pipe must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage it. Particular attention must also be paid to the tightness and sealing of each union.

The stainless steel construction offers excellent resistance to corrosion, particularly when the vehicle is regularly exposed to moisture. Stainless steel also provides good resistance to stress, vibrations and external conditions, helping to extend the service life of the pipes and reduce the need for replacement due to corrosion.

Technical specifications :
. Material : stainless steel
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Compatible fluid : LHM
. Brake type : LHM front disc brakes
. High resistance to corrosion
. Good resistance to vibrations and mechanical stresses

Vehicles :
. 2CV
. Dyane
. Méhari