Set of 6 brake tube gasket 08 mm Lockheed DOT 4

This set of 6 brake pipe seals 08 mm Lockheed DOT 4 ensures leak-tight connections between the brake pipes in the hydraulic circuit. The seals prevent fluid leaks at the connections and therefore help maintain the pressure required for the braking system to operate correctly.

These seals are fitted at the unions of 3.5 mm diameter brake pipes. They are designed for vehicles equipped with front and rear drum brakes, with a braking circuit using Lockheed or DOT 4 fluid.

During installation, each seal must be correctly positioned at the corresponding union before tightening the brake pipe. It is recommended to replace the seals whenever work is carried out on the circuit to ensure a reliable seal. Once installation is complete, the system must be checked for leaks before putting the braking system back into service.

Technical specifications :
. Material : specific rubber
. Quantity : set of 6 seals
. Compatible pipe diameter : 3.5 mm
. Compatible fluids : Lockheed or DOT 4
. Brake type : front and rear drum brakes
. Function : sealing of brake pipe connections
. Application : hydraulic braking circuit

Vehicles :
. 2CV
. Méhari
. Dyane