Rear banjo brake connector (traversing part, length 880mm)

This rear transverse banjo brake pipe carries pressurised brake fluid through the rear braking circuit. When the brake pedal is pressed, hydraulic pressure flows through the pipe to supply the rear braking system and activate the brakes.

This pipe is positioned transversely at the rear of the vehicle. It connects to the rear brake hose and ensures continuity of the hydraulic circuit to the rear braking components.

During installation, the pipe must be correctly positioned with suitable seals to ensure leak-tight connections. It must also be installed without kinks or excessive stress that could cause damage. The hydraulic circuit must be checked for leaks before the braking system is put back into service.

Technical installation diagram for banjo brake pipe before 09/1963 : Banjo brake pipe – before 09/1963.

Technical specifications :

• Material : copper-nickel alloy
• Pipe diameter : 6.35 mm
• Length : 880 mm
• Connection type : banjo
• Compatible brake fluids : Lockheed or DOT 4
• Position : rear section, transverse installation
• Function : connection to the rear brake hose
• Compatibility : 2CV from June 1952 to July 1964

Vehicles :

• 2CV