Right front banjo brake tube connector

This front right banjo brake pipe carries pressurised brake fluid to the front right wheel cylinder. When the brake pedal is pressed, hydraulic pressure flows through the pipe to the wheel cylinder, allowing the front brake to operate.

This pipe is positioned within the braking system of the front right wheel. Equipped with a banjo fitting, it is specifically designed to connect to the front right wheel cylinder on compatible 2CV models.

During installation, the pipe must be correctly positioned with suitable seals to ensure a leak-tight banjo connection. It must also be installed without kinks or excessive stress that could cause damage. The hydraulic circuit must be checked for leaks before the braking system is put back into service.

Technical installation diagram for banjo brake pipe before 09/1963 : Banjo brake pipe – before 09/1963.

Technical installation diagram for banjo brake pipe after 09/1963 : Banjo brake pipe – after 09/1963.

Technical specifications :
• Material : copper-nickel alloy
• Pipe diameter : 6.35 mm
• Length : 290 mm
• Connection type : banjo
• Compatible brake fluids : Lockheed or DOT 4
• Position : front right
• Function : supplying the front right wheel cylinder
• Compatibility : 2CV from 1952 to 1970

Vehicles :
• 2CV