Rear 8 mm brake pipe

This rear brake pipe 08 carries pressurised brake fluid through the hydraulic circuit. When the brake pedal is pressed. the pressure generated by the master cylinder is transmitted through the pipe to the rear braking system, helping to actuate the brakes.

This pipe is positioned along the vehicle platform. It connects the master cylinder to the T-piece located on the rear axle, running along the platform to the rear of the vehicle.

During installation, it must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage it.

Technical specifications :
. Material : annealed copper
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Length : 3,100 mm
. Compatible fluids : Lockheed, DOT 4 or LHM

Vehicles :
. 2CV
. Dyane
. Méhari