Rear 8 mm brake pipe kit (3 pieces)

This set of 3 rear brake pipes 08 carries pressurised brake fluid to the various components of the rear braking system. It is designed for vehicles equipped with drum or disc brakes from 1973 onwards. When the brake pedal is pressed, hydraulic pressure is transmitted through the pipes to allow the brakes to operate.

This set includes one pipe running from the calliper at the front of the vehicle, as well as two rear side pipes supplying the wheel cylinders. The pipes follow the routing of the hydraulic circuit to the rear axle to distribute the brake fluid to the left and right sides.

During installation, the pipes must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage them. The unions are fitted and removed using an 8 mm spanner. The tightness and sealing of each union must be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Number of pipes : 3
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Compatible fluids : Lockheed, DOT 4 or LHM
. Brake compatibility : drum or disc brakes
. Fitment : vehicles from 1973 onwards
. Tool for unions : 8 mm spanner

Vehicles :
. 2CV
. Dyane
. Méhari