Front 9 mm brake pipe kit (3 pieces)

This set of 3 front brake pipes 09 carries pressurised brake fluid through the vehicle's hydraulic circuit. It is designed for vehicles equipped with drum brakes using Lockheed or DOT 4 brake fluid. When the brake pedal is pressed, the pressure generated in the circuit is transmitted through the pipes to the braking components, allowing the brakes to operate.

This set includes 3 brake pipes that are positioned on the vehicle following the designated routing of the hydraulic circuit. It includes the pipe running from the calliper at the front of the vehicle, as well as the two side pipes supplying the rear wheel cylinders.

During installation, the pipes must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage them. The unions are fitted and removed using a 9 mm spanner. The tightness and sealing of each union must be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Number of pipes : 3
. Pipe diameter : 4.5 mm
. Union : 9 mm, thread pitch : 1.25
. Compatible fluids : Lockheed or DOT 4
. Brake compatibility : drum brakes
. Tool for unions : 9 mm spanner

Vehicles :
. 2CV
. Dyane
. Méhari