Master cylinder to t joint 8 mm brake pipe

This front drum brake pipe 08 carries pressurised brake fluid from the master cylinder to the front wheel cylinders. When the brake pedal is pressed. the pressure generated by the master cylinder flows through the pipe and is then distributed to the wheel cylinders, allowing the front drum brakes to operate.

This pipe is positioned at the gearbox. It connects the master cylinder to the front wheel cylinders via a distribution T-piece, which distributes the brake fluid to both sides of the vehicle.

During installation, it must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage it. Its two unions allow it to be integrated into the hydraulic circuit. The tightness and sealing of the unions must be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Pipe diameter : 3.5 mm
. Unions : 2 M8 unions, thread pitch : 1.25
. Length : 1,500 mm
. Compatible fluids : Lockheed or DOT 4
. Brake type : front drum brakes
. Position : at the gearbox
. Function : connection between the master cylinder and the front wheel cylinders via a T-piece

Vehicles :
. 2CV
. Dyane
. Méhari