Front cylinder 8 mm brake pipe

This front wheel cylinder brake pipe 08 carries pressurised brake fluid to the front wheel cylinder. When the brake pedal is pressed, hydraulic pressure flows through the pipe to the wheel cylinder, allowing the drum brake to operate.

This pipe is positioned within the vehicle's front braking system. It connects the T-piece located on the gearbox to the front wheel cylinder. One pipe is required for each side of the vehicle : one for the right wheel cylinder and one for the left wheel cylinder.

During installation, it must be correctly positioned with the appropriate seals and securely fastened to prevent rubbing, pinching or stress that could damage it. The tightness and sealing of the unions must also be checked before putting the braking system into service.

Technical specifications :
. Material : annealed copper
. Pipe diameter : 3.5 mm
. Union : 8 mm, thread pitch : 1.25
. Length : 250 mm
. Compatible fluids : Lockheed or DOT 4
. Brake type : front drum brakes
. Quantity required : 2 per vehicle, one for each front wheel cylinder

Vehicles :
. 2CV
. Méhari
. Dyane